These Are The Instructions To Flash Stock Rom or any custom rom using Smart Phone Flash Tool (SP Flash Tool) on Windows Computer.

Requirements: Your Android Smartphone should have at-least 40-50 percent of battery to perform the Flashing Process.

Flash Stock Rom using Smart Phone Flash Tool (SP Flash Tool)

Step 1::: Download and install Android USB Driver on your computer. In case Android USB Drivers are already installed on your Computer then skip this step.

Step 2:: Power Off your Android Smartphone and remove the Battery (if it is removable).

Step 3:: Download the Stock Rom or Custom Rom that you want to Flash on your Android Smartphone and extract it on your Computer.

Step 4:: Download and Extract Smart Phone Flash Tool on Your Computer. After Extracting you will be able to see the following files.

Step 5:: Now Open Flash_Tool.exe (you will find this from the extracted files in Step 4).

Step 6:: Once Smart Phone Flash Tool is launched, Click on the Download Tab.

Step 7:: In the Download Tab, now click on the scatter-loading button.

Step 8:: Now, Locate the Scatter File (you will find the scatter file in the Stock rom folder).

Step 9:: Now, Click on the Download Button to begin the Flashing Process.

Step 10:: Now, Connect your Smartphone to the Computer using USB Cable (without battery- if it is removable). After connecting the device to the computer Press Volume Down or Volume Up key, so that your computer easily detect your smartphone.

Step 11:: Once Flashing is completed, a Green Ring will appear.

Step 12:: Close the Smart Phone Flash Tool on your computer and disconnect your Android Smartphone from the computer.

Congratulations: Now your Android Smartphone is successfully running the Stock Rom you have Downloaded.

importent Note:: Take Backup Of Your Personal Data Before Flashing or Installing The Firmware On Your smartphone. As this Helps You To Recovery The mobile Data Whenever Any Thing Wrong Happens.